Company     Qualification  Product   Facility   Cooperation Contact Us     中文版
 

 

 

Home page>>Products>>Vinyl Resin Copolymer>>DM Series

Technical Data :

 

Specifications

 

DM50

 

DM55

 

DM62

Testing Method and Standard

 

Appearance

White Powder

White Powder

White Powder

Visual inspection

 

Adhesion Number/(Ml/g)

 

48-52

 

53-57

 

60-64

 

GB/T3401

 

K Value

 

45-46

 

46-48

 

49-51

 

GB/T3401

 

Mass Fraction of VAC / %

 

13-15

 

13-15

 

13-15

 

GB/T 9347-1988

 

Total volatile content %≤

 

1

 

1

 

1

 

GB/T 2149

Residue after sieving (40 Mesh)﹪

 

100

 

100

 

100

 

GB/T6003.1

 

Impurity Particales≤

 

20

 

20

 

20

 

GB/T9438

Solubility:in concentration 25% Ketone : Toluene( 1 : 1 )

Transparent

No Insolubles

Transparent

No Insolubles

Transparent

No Insolubles

 

Visual inspection

Equivalent Brand and Specifications

UM series

LC-13-50

UM series

LC-13-55

UM series

LC-13-62

 

Application

Ink, Color Chips

Ink, Color Chips

Foaming for Rubber-plastic, Surface Treatment

 

 

 

Property:

Same as most of vinyl chloride copolymer, it has tough wear resistance, good water resistance, and low gas permeability. It has good chemical stability at room temperature, not impacted by acid, alkali, salt, alcohol, oil, ester etc.

Ketone and ester is commonly used solvent, and chlorinated hydrocarbons are applied in a few situations only.

Ketone is real excellent solvent and ester has poor solubility for this product. Product can only be swelled or partly dissolved in ester, so, mostly ester acts as solvent aid.

Chlorinated hydrocarbons, such as Dichloromethane and 1,2 - dichloroethane can dissolve this product, but, trichloroethane and tetrachlorthane can only cause swelling.

Product is insoluble in alcohol and fat, and it is only swelled or partial dissolved in benzene.

Application :1. Color powder  2. Color chips  3. Color flakes    more information is available based on customers' requirement. 4. Ink

This resin is mainly applied in binding magnetic card substrates such as telephone card and credit card.

This type Solution vinyl resin provide adhesion to rigid and flexible PVC substrates.

Compatibility:

Compatible with PVC resin, epoxy resin, alkyd and phenolic resin and acrylic resin, polyester, etc; good chemical stability, not impacted by acid, alkali, salt, oil etc. at room temperature.

Poor compatibility with nitric cellulose, polyvinyl acetate and PVB(Polyvinyl Butyral)

Pigment, and Packing:

Good compatibility with most standard pigments, but must pay attention to zinc and cadmium, iron oxide containing pigments, because such pigments will promote decomposition at high temperature l (special attention should be paid in processing).

Although the product is heat-resistant and ultraviolet light resistant, but in some specific circumstances, still need to increase stability in the process. Usually, epoxy type stabilizer is excellent heat stabilizers,

when need higher thermal stability, we suggest to use organic tin compounds together with epoxy compound, because epoxy compound stabilizer and organic tin compounds will produce synergistic effect. Besides, other commonly used stabilizer are lead salt stabilizers. In addition, if use the product to make of outdoor use products, it is better to add the ultraviolet light resistance stabilizer. Normally, use light resistant heat stabilizers,such as tin stabilizer without sulfur.

Processing:

In order to avoid the risk of bleaching, the solution preparation and storage of the product should avoid to contact iron, the surface coating compound should be stored in container.

Storage:

Store in dry places (less than 25 ℃ ), the shelf life if stored in the above conditions will be at least 12 months from the date of delivery. If resin storage time has exceeded the above recommended warehouse storage time, the out-dated resin may still can be used, but the user must carefully check the finished product quality and its related properties.

Packing:

Packed in polypropylene woven bag with polypropylene plastic inner bag. Weight: 25 kg/bag.

 

< next page>
 
 Company     Qualification    Product  Facilities     Cooperation      Contact Us     中文版

Copyright @ Taizhou Zhengda Chemical Co.,Ltd.  All Rights Reserved

明日之后玩家大量脱坑
天津十一选五开奖 时时彩宝典苹果官方版 和值大小单双玩法 辽宁棋牌 手球比分查询 直播 重庆时时现场开奖结果 内蒙古时时十一选五开奖结果查询 重庆实时彩开奖结果 波克捕鱼官方专区下载 福建福彩快3中奖助手 面包车可以怎么赚钱吗 广西快三是正规彩票吗 保安外包怎么赚钱 安徽时时开奖走势图 微信赌博 天易棋牌手机版安卓版